6
When in Trouble
Isn't error code No.
is displayed ?
Doesn't the power voltage vary ?
Is the power turned on ?
Any loose connection ?
Is the connecting portion
disconnected ?
(Broke wire, contact)
Is the wiring correct ?
Isn't the connector pulled off ?
Isn't the short wire pulled off ?
Is abnormal noise generated
from the motor ?
Isn't the holding
brake engaged ?
Motor
Machine
Isn't the connection
loose ?
・P.2-70 ... "How to Use the Front Panel"
Related page
・P.2-47 "Wiring to the Connector, X4"
・P.7-9 "Outline of Setup Support Software "PANATERM"
6-2
1. When in Trouble
What to Check ?
Ground
It is normal when the light of
LINK and COM is green.
Is that right now?.
Details refer to P.2-73.
Is the seeting of node address
and parameter correct ?
RTEX Communication
Peripheral Devices
Is the wiring to Connector
X2A and X2B and X4 correct ?
Or aren't any wires pulled
off ?
Is the wiring to Connector X6
correct ?
Or aren't any wires pulled off ?
Rev.2.00