Thermo Scientific iCAP 6000 Series Maintenance Manual page 18

iCAP Customer Training Manual
Click on Method tab as shown
Click on Automated Output and fill in the relevant
boxes
Note: Make sure you tick save results to database
if you require a record of your results
Clicking on Standards allow you to edit the
concentration of the standards in the box.
Note: by clicking on Add you can add more
standards if required.
Click on Analysis Preferences
Set Parameters as required (see
iTEVA software manual for fuller
explanation of the various
parameters that can be selected)
Note: The parameters shown will be
a good starting point for an Analysis
Click on Source Settings
Note: the source settings will
depend on the particular analysis
that is to be performed but for test
purposes the defaults should give
reasonable results for an aqueous
solution.