Thermo Scientific iCAP 6000 Series Maintenance Manual page 19

iCAP Customer Training Manual
4.3.4 Running the Analysis
Put the sample uptake tube in the blank solution.
Click on the Analysis tab and then click on the
Calibration Icon, click on Run in the Calibration box
this will then analyze the blank solution
Put the sample uptake tube into the High standard
solution
The HighStd is now highlighted so click on Run
Click on Unknown sample Icon then fill in Run
Unknown box as required Place the sample tube in
unknown and Click on Run
Display of Blank solution results
showing the Elements selected in
the method setup.
Display of High Std results showing
elements selected in the method
setup.