Thermo Scientific iCAP 6000 Series Maintenance Manual page 21

iCAP Customer Training Manual
4.3.6 Autosampler Operation
Click on Sequence tab at bottom of page
Select New this will enable you to select an already
saved method to run the Autosampler.
Input the number of samples, and a sample name
as required. Click on OK and OK again
Note: The sequence Automation page must be
edited and method saved before running samples
with the autosampler.
First edit the Sequence Automation
page of the method you plan to use.
Then save the method.
Select New Autosampler on the
Auto-Session Menu. This will pop
up the dialog box shown.
Select the Autosampler rack type
from the drop down box. Click on
OK