Care And Maintenance - Titan TT5MTP26-2 Manual

TT5MTP26-2
The golden rules for care
WARNING! Always stop the engine, disconnect the spark plug connector (A3)
and let the engine cool down before performing inspection, maintenance and
cleaning work.
DANGER! Proper maintenance is essential for safe and trouble free operation.
Improper maintenance, or failure to address a problem instantly can cause a
malfunction which can result in serious injury or even death.
1. Keep the machine clean. Remove debris after each use and before storage.
2. Regular and proper cleaning helps to ensure safe operation and prolongs the life
of the machine.
3. Inspect the machine before each use for worn and damaged parts. Do not operate
it if you find broken and worn parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the machine again.
WARNING! Only perform repairs and maintenance work according to these
instructions! All other works must be performed by a qualified person!
Cleaning and Maintenance
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this machine as they might be harmful to its surfaces.
Cleaning the housing
> Use a damp, lint-free cloth to clean the housing.
> Do not emerge the machine into water or any liquids.
> Clean the ventilation openings located on the back and right-hand side of the engine
with a soft brush. Clogged ventilation openings might cause the engine to overheat.
> Wipe the surface with a dry cloth afterwards.
Cleaning the attachments
> Disassemble the attachment in reverse order from assembly.
> Use compressed air (max. 3 bar) to remove dirt accumulated on the attachment.
> Use a damp, lint-free cloth to clean the surface.
> Wipe the surface with a dry cloth afterwards.

Care and maintenance

55