Titan TT5MTP26-2 Manual page 29

TT5MTP26-2
3. Rotate the backing flange (D6) until its hole aligns with the one on the gear head (D3)
(Fig. 9).
4. Insert the multi-tool II (F2) into the hole to lock the rotation of the backing flange (D6).
5. Using the multi-tool I (F1) loosen the securing nut (D10) by turning it clockwise.
6. Remove the securing nut (D10), the front flange (D9) and the locking flange (D8)
from the gear head (D3).
7. Screw the string trimmer head (D12) onto the spindle (D5) anti-clockwise securely
(Fig. 10).
8. Make sure the string trimmer head (D12) is firmly tightened and remove the
multi-tool II (F2).
9
D10
D9
D8
D5
D3
D6
F2
10
D5
F2
Before you start
D12
29