Related Manuals for Titan SF2843
Summary of Contents for Titan SF2843
- Page 1 SAFETY AND OPERATING MANUAL 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 1 2006-5-25 16:38:10...
- Page 2 SF2843 CSJ18P-M-060419.indd 2 2006-5-25 16:38:10...
- Page 3 This guarantee does not affect your statutory rights.This guarantee is only valid in the UK. For further technical advice, spare parts or repair service (outside of guarantee) please contact the customer helpline number on 0845 607 6380. 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 3 2006-5-25 16:38:11...
-
Page 4: Safety Instructions
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. SF2843 CSJ18P-M-060419.indd 4 2006-5-25 16:38:11... - Page 5 Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 5 2006-5-25 16:38:11...
- Page 6 20.Your saw and battery pack will be warm when working, this is normal. 21. When not in use, remove a charged battery pack from the charger. 22. Always remove the battery pack from the charger immediately after re-charging is SF2843 CSJ18P-M-060419.indd 6 2006-5-25 16:38:11...
- Page 7 ‘live’ and shock the operator . 24. Always wear a dusk mask when performing an operation. SYMBOLS Read the manual Warning Wear gloves Wear dust mask,eye & ear protection Conforms to relevant safety standards 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 7 2006-5-25 16:38:12...
- Page 8 LOCK-OFF BUTTON ON/OFF SWITCH HAND GRIP AREAS BATTERY PACK PARALLEL GUIDE BASE PLATE ANGLE PLATE ORBITAL (PENDULUM) ACTION CONTROL LEVER BLADE GUIDE 10. PARALLEL GUIDE HOLDER 11. BLADE CLAMP BUTTON 12. BLADE CLAMP HOLDER SF2843 CSJ18P-M-060419.indd 8 2006-5-25 16:38:15...
-
Page 9: Technical Data
Bevel capacity: 0±45 Normal charging time: 1hour Battery capacity: 1.5Ah Charger input data: 230V~50Hz Machine weight: 2.85kg ACCESSORIES 1hr charger 1.5Ah Ni-cd battery pack Parallel guide Hex key Saw blade for wood 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 9 2006-5-25 16:38:15... - Page 10 The charger timer circuit and battery pack temperature safety cutout device prevents overcharging of your battery pack. Warning: After long usage the battery will become hot, let the hot battery cool down for 1 hour before SF2843 CSJ18P-M-060419.indd 10 2006-5-25 16:38:16...
- Page 11 Warning: blade teeth are very sharp, wear gloves when changing blades. Fig 4b For best cutting results ensure you use a blade suited to the material and cut quality you need. Fig 5 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 11 2006-5-25 16:38:16...
- Page 12 (7) for preset angles (0°, 5°, 10°, 15°, 20° 25°, 30°, 35°, 40°, 45°) (See fig9). For other miter angles, rotate to your desired angle (use a protractor scale). Fig 9 SF2843 CSJ18P-M-060419.indd 12 2006-5-25 16:38:18...
-
Page 13: Working Hints For Your Jigsaw
Any movement of the material may affect the quality of the cut. The blade cuts on the upward stroke and may chip the uppermost surface. Ensure your uppermost surface is a non-visible surface when your work is finished. 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 13 2006-5-25 16:38:18... -
Page 14: Metal Cutting
FREQUENTLY ASKED QUESTIONS 1. Why does the saw not turn on when you press the switch? The lock-off button (1) is locked and you must depress the button (1) first (See fig3). SF2843 CSJ18P-M-060419.indd 14 2006-5-25 16:38:19... - Page 15 & working with your saw. Do not re-charge your battery pack below 2 F) and above 35 C (95 F), as this will affect performance. 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 15 2006-5-25 16:38:19...
-
Page 16: Environmental Protection
L. A 13AMP (BS1363 or BS1363/A) plug must be used and a 3 AMP fuse must be fitted. 3 AMP FUSE BLUE N (NEUTRAL) BROWN L (LIVE) OUTER CABLE GRIP SLEEVE SF2843 CSJ18P-M-060419.indd 16 2006-5-25 16:38:19... -
Page 17: Declaration Of Conformity
EN 55014-2: 1997/A1: 2001 EN 60335-1: 1994/A11: 1995/A12, A1: 1996/A13, A14: 1998/A15, A2: 2000/A16: 2001 EN 60335-2-29: 1996/A11: 1997 Authorised Signatory Date: 15/04/06 Signature: Name: Peter Harries Screwfix Direct Ltd Quality Manager 2006 18V JIG SAW SF2843 SF2843 CSJ18P-M-060419.indd 17 2006-5-25 16:38:19... - Page 18 SF2843 CSJ18P-M-060419.indd 18 2006-5-25 16:38:19...
- Page 19 SF2843 CSJ18P-M-060419.indd 19 2006-5-25 16:38:20...
- Page 20 SF2843 CSJ18P-M-060419.indd 20 2006-5-25 16:38:20...