Titan TTI882MLT Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Power Tool
  5. TTI882MLT
  6. Manual

Titan TTI882MLT Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TTI882MLT
WARNING! Read the instructions before using the product!

Advertisement

Table of Contents
loading

Related Manuals for Titan TTI882MLT

Summary of Contents for Titan TTI882MLT

  • Page 1 TTI882MLT WARNING! Read the instructions before using the product!

  • Page 2: Table Of Contents

    TTI882MLT Let's get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety Symbols Your product Technical and legal information Before you start more detail... Product functions...

  • Page 3: Safety

    Safety TTI882MLT Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Page 4 Safety TTI882MLT Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
  • Page 5 Safety TTI882MLT Personal safety 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Page 6 Safety TTI882MLT 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
  • Page 7 Safety TTI882MLT 5. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Page 8 Safety TTI882MLT 3. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 4. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,...
  • Page 9 Safety TTI882MLT Service 1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
  • Page 10 Safety TTI882MLT risk of injury. 6. Do not treat the surface to be worked with solvent containing fluids. Materials being heated by the scraping can cause toxic vapours to develop. 7. Exercise extreme caution when handling the scraper accessory. The accessory is very sharp; danger of injury.
  • Page 11 Safety TTI882MLT 2. Do not carry or store battery together with necklaces, hairpins or other metal objects. 3. Do not pierce the battery with nails, strike the battery with a hammer, step on the battery or otherwise subject it to strong impacts or shocks.
  • Page 12 Safety TTI882MLT The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsumdusts. Construction workers are one of the at-risk groups within this because of the dust that they breathe: silica dust is not just a nuisance;...
  • Page 13 Safety TTI882MLT How to reduce the amount of dust? 1. Reduce the amount of cutting by using the best sizes of building products. Use a less powerful e.g. a block cutter instead of angle grinder. 2. Using a different method of work altogether – e.g.
  • Page 14 Safety TTI882MLT WARNING! Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paint •...
  • Page 15 Safety TTI882MLT The declared vibration emission value should be used as a minimum level and should be use with the current guidance on vibration. Calculating the actual period of use can be difficult and the HSE website has further information.
  • Page 16 Safety TTI882MLT Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: 1.

  • Page 17: Symbols

    Symbols TTI882MLT Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Read the instruction manual Wear eye protection Wear hearing protection.

  • Page 18: Your Product

    Your product TTI882MLT Your product 10. Accessory attachment plate 1. LED work light 11. Flange bolt 2. Quick-release lever 12. Sanding pad 3. On/off switch 13. Adaptor 4. Gripping surface 14. Sanding sheet 5. Battery release button 15. Scraper 6. Power bar button 16.

  • Page 19: Technical And Legal Information

    Technical and legal TTI882MLT information Technical specifications Multi tool Rated voltage: 18V d.c. Rated speed n 10000-15000 /min Weight (without battery): 1.0 kg Battery (may not be included) Battery pack model: TTI801BAT Battery voltage: 18V d.c. Battery capacity: Battery cell:...
  • Page 20 RATING LABEL EXPLANATION TTI882MLT = MODEL NUMBER TT= TITAN I=18V Li-Ion 882= Serial number...

  • Page 21: Before You Start

    Before you start TTI882MLT Unpack Unpack all parts and lay them on a flat, stable surface. Remove all packing materials and shipping devices if applicable. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
  • Page 22 Before you start TTI882MLT Accessories Accessory For materials HCS semi Wood, plastic, drywall, circle blade soft metals Plunge cut Wood, plastic, drywall blade (For wood) Plunge cut Wood, plastic, soft metals blade (For metal) Scraper Paint & varnish, bonded carpet, soft adhesives,...
  • Page 23 Before you start TTI882MLT To select the sanding sheets Sanding sheets are available with different grain sizes (grit), depending on the workpiece material and material removal. Grit Type Example of use 60 or less Very coarse Material removal, heavy paint...
  • Page 24 Before you start TTI882MLT NOTE: The accessory attachment plate is magnetic and will hold ferrous accessories in plate. Insert and depress the flange bolt (11) until you hear a click indicating that the flange bolt (11) has engaged in the shaft. Press and turn the flange bolt (11) anticlockwise for 90°.
  • Page 25 Before you start TTI882MLT To attach the sanding sheets Align the sanding sheet (14) with the sanding pad (12). Press the sheet firmly in place (Fig. 7). To remove the sheet, simply pull it off If one point has become worn, peel off the sanding sheet, turn it...
  • Page 26 Before you start TTI882MLT To use the adaptor NOTE: The adaptor can be used to install branded accessories. Put the “Adaptor” (13) on the accessory attachment plate. Place correct branded accessory on top of adaptor (Fig. 8). With your gloved hand holding the accessory, insert and depress the flange bolt (11) until you hear a click indicating that the accessory is secured.
  • Page 27 Before you start TTI882MLT To remove or install the battery pack Depress the battery pack release button to release and slide the battery pack out from your tool (Fig. 9). After recharge, slide it back into your tool. A simple push and slight pressure will be sufficient.

  • Page 28: In More Detail

    detail... more Product functions Operation Care and maintenance Trouble shooting Guarantee Declarations of conformity...
  • Page 29 Product functions TTI882MLT Intended use This tool is intended for sanding (not for plaster/drywalls) and scraping, as well as for cutting wood, plaster, plastics and soft (non-ferrous) metals, by using appropriate accessories. It should not be used for working on materials that are dangerous to health.
  • Page 30 Product functions TTI882MLT LED work light The LED work light (1) will automatically illuminate when you turn the tool ON, and will turn off after you turn the tool OFF. This provides additional light on the surface of the workpiece for operation in lower light situations (Fig.
  • Page 31 Operation TTI882MLT Sanding WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Do not use the same sanding sheet for wood and metal.
  • Page 32 Operation TTI882MLT Scraping The tool is suitable for scrapping and removing surface coverings. For scraping, select a high speed setting. To remove surface covers, place the scraping blade vertically on the work piece. Switch the tool on and cut down through the covering.
  • Page 33 Operation TTI882MLT After use 1. Switch the product off, Remove the battery pack from the tool and let it cool down. 2. Check, clean and store the product as described below.
  • Page 34 Care and maintenance TTI882MLT The golden rules for cleaning WARNING! Always switch the product off, remove the battery pack and let the product cool down before performing inspection, maintenance and cleaning work! Keep the product clean. Remove debris from it after each use and before storage.

  • Page 35: Care And Maintenance

    Care and maintenance TTI882MLT General cleaning NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. • Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
  • Page 36 Care and maintenance TTI882MLT Disposal of an exhausted battery pack To preserve natural resources, please recycle or dispose of the battery pack properly. This battery pack contains Li-Ion batteries. Consult your local waste authority for information regarding available recycling and/or disposal options.
  • Page 37 Care and maintenance TTI882MLT • Store the product and its accessories in a dark, dry, frost- free, well- ventilated place. The ideal storage temperature is between 10 °C and 30 °C. • Always store the product in a place that is inaccessible to children.
  • Page 38 Troubleshooting TTI882MLT Problem Tool/Battery Possible Solution Status cause Product Overload Extremely high Relieve the load suddenly protection torque, binding immediately, Stops; The and stalling reset the tool by LED work light situations, switching off and (if fitted) is overloading of back on again.
  • Page 39 We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN Multi Tool) has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost.
  • Page 40 Declaration of conformity TTI882MLT (UK) DECLARATION OF CONFORMITY Product • Cordless Multi Tool • TTI882MLT • Serial number 00001-99999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
  • Page 41 • Cordless Multi Tool/Outil multifonction sans fil/Narzędzie wielofunkcyjne bezprzewodowe/Unealtă multifuncțională fără fir/ Multiherramienta inalámbrica/ Multiferramenta sem fios • TTI882MLT • Serial number 00001-99999 Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nazwa i adres producenta lub jego upoważnionego przedstawiciela:...
  • Page 42 TTI882MLT Product/ Produit/ Produkt/ Model/ Modèle/ Model/ Produsul/ Producto/ Produto Modelul/ Modelo/ Modelo Cordless Multi Tool/Outil TTI882MLT 5059340355641 (UK) multifonction sans fil/ 5059340253749 (UK) Narzędzie wielofunkcyjne 5059340287157 (EU) bezprzewodowe/Unealtă 5059340253756 (EU) multifuncțională fără fir/ Multiherramienta inalámbrica/Multiferramenta sem fios The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: L’objet de la déclaration décrit ci-dessus est conforme à...
  • Page 43 TTI882MLT References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou des autres caractéristiques techniques, y compris la date de celles-ci, par rapport auxquelles la conformité...
  • Page 44 Manufacturer • Fabricant • Producent • Producător • Fabricante: UK manufacturer: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom www.kingfisher.com/products EU manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com | www.screwfix.com | www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...

Table of Contents