Cleaning And Maintenance - Titan Pro V55 Owner's Manual

Cleaning and Maintenance

Keep the intake openings on the housing clean and free of obstructions. Use a soft, dry brush
to clean the openings periodically. Use only mild soap and a damp cloth to clean the heat gun.
Many household cleaners contain chemicals which could seriously damage the housing.
Do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar products
when cleaning the heat gun. Never allow any liquid to get inside the tool or immerse any part of
the tool into a liquid.
Storage
Allow the heat gun nozzle to cool to room temperature before placing in storage.
The nozzle will turn dark over time because of the high heat. This is normal and will not affect
the performance or life of the unit.
Accessories
The following accessories may come with the gun or may be purchased separately by calling
1-800-526-5362.
Concentrator Nozzle
P/N 0503674
IMPORTANT: Always use gloves when handling the heat gun. Use of nozzle accessories
will produce hotter gun temperatures which may result in decreased durability of the gun.
To attach an optional item to the gun:
1. Set the heat gun upright on a level surface until
the tip is cool.
2. Set the item onto the tip of the heat gun and push
firmly into place by hand.
To remove an optional item:
1. Set the heat gun upright on a level surface until
the tip is cool.
2. Pull the item off of the tip.
8
English
Flare Nozzle Glass Protector
P/N 0503675 P/N 0503676
Re ector Nozzle
P/N 0503677