TT5MTP26-2
3. Remove the trimming guard (D14) completely (Fig. 14).
4. Using the hex key (F4) loosen the 2 pre-assembled bolts on the cutting-
attachment guard (D4).
5. Attach the cutting-attachment guard (D4) onto the plate on the shaft tube (D2).
Secure the parts with the 2 bolts using the hex key (F4)
15
F4
F4
14
D14
D4
D2
Bolt
hex key (F4) (Fig. 15).
D4
Before you start
31