Titan TT5MTP26-2 Manual page 71

TT5MTP26-2
Pole pruner
Problem Possible cause
Bad cutting Saw chain not tensioned
performance. properly.
Saw chain is dull/damaged.
Excessive Saw chain is dull/damaged.
vibration/
noise or
Screws/nuts are loosened.
smoke.
Hedge trimmer
Problem Possible cause
Bad cutting Cutter blades are worn?
performance.
Thickness of the branches
exceeds capacity.
Excessive Cutter blades damaged?
vibration/
Nuts on the cutter blades
noise or
loosened?
smoke.
Incorrect fuel or incorrect
mixture?
Troubleshooting
Solution
Tension the saw chain properly.
Sharpen or replace the saw
chain.
Sharpen or replace the saw
chain.
Stop the engine and re-tighten
the loosened screws/nuts.
Solution
Have a qualified person sharpen
or replace the cutter blades.
Only cut branches with a
diameter of maximum 24 mm.
Replace the broken attachment.
Stop the engine and re-tighten
the loosened nuts.
Stop the engine, empty tank, then
fill up with the correct mixture of
fuel to oil (40:1).
71