Titan TT5MTP26-2 Manual page 26

Before you start
WARNING! Disconnect the spark plug connector before adjusting saw chain
tension!
The cutting edges of the saw chain are sharp! Always wear protective gloves
when handling chain!
Always maintain proper chain tension! A loose chain increases the risk of
kickback! A loose chain may jump out of the guide bar groove! This may injure
the operator and damage the chain! A loose chain will cause rapid wear to the
chain, guide bar and the drive sprocket! Tensioning the chain too tightly will
overload the engine and cause damage, and insufficient tension can cause
chain derailing, whereas a correctly tightened chain provides the best cutting
characteristics and prolonged working life! The chain life mainly depends upon
sufficient lubrication and correct tensioning!
6. Using the multi-tool III (F3), rotate the tension screw clockwise to increase the
tension on the saw chain (C7) or anti-clockwise to decrease the tension on the saw
chain (C7) (Fig. 6).
6
Tension screw
26
C7
F3
TT5MTP26-2