Installing Device On Wall; Figure 4-9 Removing The Sliding Connector Bottom From The Guide Rail; Figure 4-10 Removing The Device From The Guide Rail - Raisecom Gazelle S1000i-LI User Manual

Raisecom
Gazelle S1000i-LI (A) User Manual

Figure 4-9 Removing the sliding connector bottom from the guide rail

Step 2 Pull the device bottom in the opposite direction of the guide rail to lean it and remove the rail
clip bottom from the guide rail, as shown in Figure 4-10.

Figure 4-10 Removing the device from the guide rail

4.2.2 Installing device on wall


You need to remove the rail clip on the rear panel before the wall-mount
installation.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Hardware installation
52