Touchscreen; Calibrating The Touchscreen; Figure 3-2 Touchscreen Calibration, Targets; Figure 3-3 Touchscreen Calibration, Save And Exit - LXE VX5 Reference Manual

78

Touchscreen

Calibrating the Touchscreen

Although the touch screen is installed and calibrated at the factory, users may make adjustments to
it by using the Fujitsu Touch Panel on the Microsoft Windows Programs menu. To calibrate the
touchscreen, select Start | Programs | Fujitsu Touch Panel (USB) | Touch Screen Calibration
Utility.
The calibration utility displays a red cross on the screen. Touch the center of the cross with the
stylus and hold for a few seconds. Release and repeat with the next cross. After all twelve
locations have been touched, either press <Enter> or click the Calibration button.
To save the new calibration settings, click on the Save & Exit button or press <Enter>.
To discard the new calibration settings, click Cancel & Exit or press <Esc>.
VX5 Reference Guide

Figure 3-2 Touchscreen Calibration, Targets

Figure 3-3 Touchscreen Calibration, Save and Exit

Touchscreen
E-EQ-VX5RG-G