Main Menu Options; Legacy Diskette (A And B) - LXE VX5 Reference Manual

BIOS Setup

Main Menu Options

To edit parameters, use the up and down arrow key to move from parameter to parameter.
Use the space key or an alpha-numeric key to modify a parameter value.
Press F1 to activate the help screen. Then use the panning function to move around the help
screen. Press ESC to close the help screen.
Use the left and right arrow keys to move from menu to menu.
Press the ESC key or key sequence to go directly to the Exit Menu.
When changes have been made, press an arrow key to go to another parameter or menu or press
ESC to go to the Exit Menu.
Settings are saved temporarily as each parameter activity screen is closed. Changes are saved to
CMOS RAM when "Save and Exit" is selected and the BIOS Setup program closes.
Changed and saved parameter values take effect after the VX5 is rebooted.
Note:

Legacy Diskette (A and B)

This option is used to indicate if a floppy disk drive is attached to the VX5. The VX5 does not
have a provision for a standard floppy drive; however, a USB floppy may be attached to the USB
interface cable.
E-EQ-VX5RG-G
Menu Option
System Time
System Date
Legacy Diskette (A: and B:)
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Memory Shadow
Memory Cache
System Memory
Extended Memory
BIOS Date (LXE0R100 only)
The secondary drive is either an ATA Compact Flash or ATA PCMCIA card. Please
refer to "ATA Secondary Drive" later in this chapter for more information.
Values:
Disabled
360KB 5¼"
1.2MB 5¼"
720KB 3½"
1.44/125MB 3½"
2.88MB 3½"
Default: Disabled
Default Value
Disabled
Auto
Auto
Auto
Auto
---
---
640KB
252928KB
09/14/06
No floppy drive present.
The option chosen will depend
on the drive attached.
common are 1.44MB 3½" drives.
Most
VX5 Reference Guide
63