PCMCIA/CardBus and ATA Slots
3.
Before completely inserting the 2.4GHz Radio, connect the Antenna Cable to the 2.4GHz
Radio, using the port(s) indicated below:
Summit CF Radio Card
The Summit CF radio is installed on a PCMCIA adapter. Hold the radio card with the
antenna ports facing down. Connect the antenna cable(s) as follows:
Cisco Radio Card
E-EQ-VX5RG-G
•
Summit radio with single antenna – Connect antenna cable to Main port.
Auxiliary port is not used.
•
Summit radio with dual antennas – Connect antenna cables to both Main and
Auxiliary ports.
Figure 2-38 Summit Antenna Cable Connections
•
Cisco radio with single antenna – Connect antenna cable to right port, as shown
below.
•
Cisco radio with dual antennas – Connect antenna cables to both ports.
Left Port
Figure 2-39 Cisco Antenna Cable Connections
Main
Auxiliary
Port
Port
Right Port
VX5 Reference Guide
51