Updating Firmware; Figure 4-53 Cisco Preferences - LXE VX5 Reference Manual

Cisco Radio

Updating Firmware

Cisco firmware can be updated manually or automatically.
E-EQ-VX5RG-G
•
To manually update the radio card's firmware, click on the Load Firmware icon on
the main Cisco screen. Browse to the location of the desired firmware.
•
To automatically load new firmware when a new radio driver is installed, click on
the Preferences icon on the main Cisco screen. Make sure the checkbox for
"Automatically load new firmware when NDIS driver is updated" is checked.

Figure 4-53 Cisco Preferences

169
VX5 Reference Guide