Leap; Figure 4-51 Cisco Properties – Leap Settings - LXE VX5 Reference Manual

166

LEAP

Note:
To enable LEAP, select LEAP from the Network Security Type Box. Then click the Configure
LEAP... button. When LEAP is selected, Static WEP is disabled and Dynamic WEP is enabled
automatically. The LEAP Settings screen is displayed.
LEAP allows a Temporary or Saved User Name and Password. The Temporary User Name and
Password can be set as follows:
The Saved User Name and Password is set as follows:
Additional options include:
VX5 Reference Guide
To use LEAP with WPA, please see LEAP/WPA Configuration later in this chapter.
Figure 4-51 Cisco Properties – LEAP Settings
•
Use the Windows User Name and Password and start authentication automatically.
•
Automatically prompt for the User Name and Password and start LEAP
authentication automatically.
•
Manually start the LEAP authentication process, which prompts for the User Name
and Password.
•
Enter a user name and password.
•
Re-enter the password
•
Specify a domain name, if desired.
•
Include Windows Logon Domain with user Name – Used to pass the Windows login
domain along with the user name in an environment with multiple domains.
•
No Network Connection Unless User is Logged In – Forces the client adapter to
disassociate after you log off so another user cannot access the network without
entering a user name and password.
Cisco Radio
E-EQ-VX5RG-G