Post Informational Messages - LXE VX5 Reference Manual

System Testing
02F6 Software NMI failed
Possible Cause
Cannot generate software NMI (Non-Maskable Interrupt).
Action
Contact LXE's Customer Support.
02F7 Fail-Safe Timer NMI Failed
Possible Cause
Server BIOS2 test error: Fail-safe timer takes too long.
Action
Contact LXE's Customer Support.

POST Informational Messages

The following table lists the POST informational messages for the VX5.
Message
nnn kB System RAM Passed
nnn kB Extended RAM Passed
nnn kB Cache/Shadow RAM Passed
UMB upper limit segment address: nnn
Video BIOS shadowed
System BIOS shadowed
Fixed Disk n
Press the <F1> key to continue
Press <F2> to enter Setup
Entering SETUP....
E-EQ-VX5RG-G
Meaning
The amount of base memory that tested
successfully.
The amount of extended memory that tested
successfully.
The amount of system cache or shadow RAM
tested successfully.
Displays the address of the limit of Upper Memory
Blocks.
The video BIOS has successfully been copied to
shadow RAM.
The system BIOS has successfully been copied to
shadow RAM.
Fixed disk n (0 – 3) identified.
This message indicates that an error was found
during POST. Pressing the <F1> key allows the
system to attempt to boot.
Optional prompt displayed during POST. If the
message is suppressed, pressing <F2> still enters
Setup.
Starting the Setup program.
227
VX5 Reference Guide