Validate Server Certificate; Figure 4-79 Peap Properties Certificate Authority - LXE VX5 Reference Manual

Cisco Radio

Validate Server Certificate

Install the Root CA or trusted CA that issued the ACS server certificate. Please see "Installing a
Root CA Certificate" earlier in this chapter for instructions.
Navigate to the Wireless Network Settings screen.
Click the Authentication tab then the PEAP Properties box.
Check the Validate server certificate box.
From the drop down box choose the CA Root certificate.
Check the Connect only if server is signed by specified root CA box.
Click OK to dismiss the configuration screens.
The root CA will be validated only when the radio re-connects with the new wireless parameters
in this configuration.
E-EQ-VX5RG-G

Figure 4-79 PEAP Properties Certificate Authority

185
VX5 Reference Guide