LXE VX5 Reference Manual page 107

VX5 Delivered with No OS
11. After connecting to the network, perform all necessary installations.
12. Restart the VX5 and edit the BIOS to return the primary IDE to the top of the boot order.
13. Save the change and reboot the VX5.
14. After the VX5 boots, verify that all software is installed and the unit is operating correctly.
Note:
Files on Bootable Diskette
Note:
E-EQ-VX5RG-G
You may wish to review the "Microsoft Windows Setup and Configuration" section,
earlier in this chapter, to set up Windows as desired.
The files included on the boot disk shown below are examples only. The files contained
on your bootable diskette and the directory structure may vary depending on the network
card and software used.
Directory of A:\
COMMAND.COM
NET.CFG
AUTOEXEC.BAT
CONFIG.SYS
HIMEM.SYS
DIR.TXT
EDIT.EXE
ATTRIB.EXE
FDISK.EXE
XCOPY.EXE
FORMAT.COM
QBASIC.EXE
SOCKETLP
Directory of A:\SOCKETLP
CIRRFIX.EXE
DRIVER.LST
ENABLELP.EXE
ETHDRV.EXE
FTP.EXE
IPSTAT.EXE
LSL.COM
NE2000.COM
NE2000.INS
NET.CFG
ODIPKT.COM
PCTCP.INI
PING.EXE
SKTID.EXE
TCP.EXE
TFTP.EXE
(See example file below)
(See example file below)
(See example file below)
<DIR>
91
VX5 Reference Guide