LXE VX5 Reference Manual page 108

92
Sample Files for Installation Procedure
Note:
NET.CONFIG
Link Driver NE2000
; Remove the semi-colon in front of the frame type you will use.
; This frame type must match what the NetWare server is using.
; FRAME Ethernet_802.2
; FRAME Ethernet_802.3
; FRAME Ethernet_SNAP
FRAME Ethernet_II
NetWare DOS Requester
; If you know the name of your preferred server, remove the
; semi-colon below and enter the preferred server name after
; the equal sign.
;preferred server =
CONFIG.SYS
DEVICE=HIMEM.SYS /testmem:off
FILES=30
BUFFERS=20
DEVICE=a:\socketlp\enablelp.exe
socket=1
LASTDRIVE=Z
AUTOEXEC.BAT
@echo off
cd\socketlp
LSL
ne2000
odipkt
SET PCTCP=a:\socketlp\pctpc.ini
ethdrv.exe
VX5 Reference Guide
The example files shown below are examples only. Your files may differ depending on
the Ethernet card used.
Port 340
Int 7
FIRST NETWORK DRIVE = F
VX5 Delivered with No OS
membase=0xE8000 messages=enabled
E-EQ-VX5RG-G