Wpa Psk Configuration; Figure 4-98 Wireless Properties Association - LXE VX5 Reference Manual

198

WPA PSK Configuration

Configure the Wireless Network Settings as described in "Wireless Network Configuration",
earlier in this chapter.
Change the Network Authentication to WPA-PSK.
Enter an ASCII network key in the Network key text field.
Enter the same key in the Confirm network key text field.
There is no server authentication when using WPA-PSK, so no additional configuration is needed.
VX5 Reference Guide

Figure 4-98 Wireless Properties Association

Cisco Radio
E-EQ-VX5RG-G