LXE VX5 Reference Manual page 137

Summit Radio
Radio Mode
Specify 802.11g and/or 802.11b when communicating with AP.
Options:
Default:
Auth Type
802.11 authentication type used when associating with AP
Options:
Default:
Note:
EAP Type
Extensible Authentication Protocol (EAP) type used for 802.1x authentication to AP
Options:
Default:
Note:
E-EQ-VX5RG-G
B rates only
BG Rates Full
G rates only
BG optimized
BG optimized
Open
Shared key
LEAP
Open
Set the Auth Type radio parameter is set to "Open" for all configurations unless using
LEAP (not WPA) and the AP is configured for network EAP only. In this case, set the
Auth Type radio parameter to "LEAP".
None
LEAP
EAP-FAST
PEAP-MSCHAP
PEAP-GTC
None
The EAP type chosen determines if the Credentials button is active. Available entries on
the Credentials pop up window vary by EAP type chosen.
121
VX5 Reference Guide