Eap-Fast; Figure 5-24 Eap-Fast Configuration - LXE VX5 Reference Manual

144

EAP-FAST

To use EAP-FAST, make sure the following profile options are used.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC
provisioning, the user credentials, whether entered on the saved credentials screen or the signon
screen, are sent to the RADIUS server. The RADIUS server must have auto provisioning enabled
to send the PAC provisioning credentials to the client device. Please refer to the "LXE Security
Primer" for more information on the RADIUS server configuration.
For automatic PAC provisioning, once a username/password is authenticated, the PAC
information is stored on the computer. The same username/password must be used to authenticate
each time. See the note on the next page for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
Please review "Sign-On vs. Stored Credentials", earlier in this chapter.
VX5 Reference Guide
•
Enter the SSID of the Access Point assigned to this profile
•
Set EAP Type to EAP-FAST
•
Set Encryption to WPA TKIP
•
Set Auth Type to Open

Figure 5-24 EAP-FAST Configuration

Summit Radio
E-EQ-VX5RG-G