54
3.
Note:
4.
5.
6.
USB Mouse
The USB port may be used to connect a USB mouse to the VX7, however the mouse pointer may
not always be visible. Please see "Touchscreen and USB Mouse" later in this manual for more
details.
VX7 User's Guide
Use a strain relief clamp to secure the cable.
Note:
The VX7 may be powered On any time after the D15 connector has been
secured to the VX7.
Figure 50 Connect USB Device to Dongle Cable
USB Host connection shown.
Plug the desired device, such as a USB mouse or floppy drive, into the end of the
dongle cable with the USB port. Refer to the documentation for your USB device for
more details on installation. USB devices may be installed, removed or swapped
without turning off the VX7.
Figure 51 Connect Ethernet Cable to Adapter Cable
Insert the network cable and ensure it is firmly seated in the connector jack.
To remove the Ethernet cable, press the release tab on the cable end.
Ethernet and USB Ports
E-EQ-VX7OGWW-A