Wpa Psk; Figure 5-30 Wpa/Psk Encryption; Figure 5-31 Psk Entry - LXE VX3X Reference Manual

Summit Radio

WPA PSK

To connect using WPA/PSK, make sure the following profile options are used:
Click WEP keys/PSKs button.
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and click OK.
Once configured, click the Commit button. Ensure the correct Active Profile is selected on the
Main tab and warmboot. The SCU Main tab shows the device is associated after the radio
connects to the network.
E-EQ-VX3XRG-D
•
Enter the SSID of the Access Point assigned to this profile
•
Set EAP Type to None
•
Set Encryption to WPA PSK
•
Set Auth Type to Open

Figure 5-30 WPA/PSK Encryption

Figure 5-31 PSK Entry

191
VX3X Reference Guide