Installing The Switch On A Table; Figure 11: Switch Installation On A Table; Figure 12: Unsupported Table Installations - Allied Telesis x330-10GTX Installation Manual

Chapter 2: Beginning the Installation

Installing the Switch on a Table

46
You can operate the switch on a table or desktop. Refer to Figure 11.
Figure 11. Switch Installation on a Table
The following guidelines are in addition to those in "Choosing a Site for the
Switch" on page 42:
 Do not stack switches on a table.
 Do not install the switch upside down on a table.
 Do not install the switch vertically on a table.
Figure 12. Unsupported Table Installations
Warning
Switches should not be stacked on a table or desktop. They could
present a physical safety hazard if you need to move or replace
switches.  E91
Warning
The device is heavy. Use both hands to lift it. You might injure
yourself or damage the device if you drop it.  E94