Novalct; Smartlct - NovaStar MCTRL660 PRO User Manual

Independent controller

Hide thumbs Also See for MCTRL660 PRO:

Table of Contents

Figure 7-2 SmartLCT

Firmware Update

7.4.1 NovaLCT

In NovaLCT, perform the following steps to update the firmware.

Step 1 Run the NovaLCT. On the menu bar, go to User > Advanced Synchronous System User Login. Enter the

password and click Login.

Step 2 Type the secret code "admin" to open the program loading page.

Step 3 Click Browse, select a program package, and click Update.

In SmartLCT, perform the following steps to update the firmware.

Step 1 Run SmartLCT and enter the V-Sender page.

Step 2 In the properties area on the right, click

Step 3 Click

to select the update program path.

Step 4 Click Update.

Sending Card Name Customization

Customize the name of the sending card. This name and the IP address is displayed alternately on the front

panel of the MCTRL660 PRO.

Step 1 Run the NovaLCT software. On the menu bar, go to User > Advanced Synchronous System User Login.

Enter the password and click Login.

Step 2 Go to Tools > Controller Cabinet Configuration File Import to enter the controller cabinet configuration file

importing page.

www.novastar.tech

MCTRL660 PRO Independent Controller User Manual

to enter the Firmware Upgrade page.

Table of Contents

Do you have a question about the MCTRL660 PRO and is the answer not in the manual?