NovaStar MCTRL660 PRO User Manual page 20


This function is disabled when the input source is SDI.

Image mirroring and low latency cannot be enabled at the same time.
Figure 6-13 Image mirroring
Step 1 On the home screen, press the knob to enter the main menu.
Step 2 Select Mirror and press the knob to enter its submenu.
Step 3 Set the mirroring mode for the image loaded by the current Ethernet port.
Step 4 (Optional) Select Apply to All Ports and press the knob. The mirroring settings will take effect on all other
Ethernet ports automatically.
The mirroring effects are illustrated in the following figures.
Figure 6-14 Left-right mirroring of the image loaded by Ethernet port 1
As shown in Figure 6-14, after you set the mirroring mode as left-right for Ethernet port 1, the entire image is
mirrored horizontally, but only the Ethernet port 1 area displays the partial mirrored image.
Figure 6-15 Left-right mirroring of images loaded by Ethernet ports 1–2
As shown in Figure 6-15, after you set the mirroring mode as left-right for Ethernet ports 1–2, the entire image is
mirrored horizontally, but only the areas of Ethernet ports 1–2 display the partial mirrored images.
www.novastar.tech
MCTRL660 PRO Independent Controller User Manual
17