NovaStar MCTRL660 PRO User Manual page 6

Output
Control
www.novastar.tech

Custom resolutions supported

HDCP 1.4 compliant

Supported standard resolutions:
1024×768@(24/30/48/50/60/72/75/85/100/120)Hz
1280×1024@(24/30/48/50/60/72/75/85)Hz
1366×768@(24/30/48/50/60/72/75/85/100)Hz
1440×900@(24/30/48/50/60/72/75/85)Hz
1600×1200@(24/30/48/50/60)Hz
1920×1080@(24/30/48/50/60)Hz
1920×1200@(24/30/48/50/60)Hz
2560×960@(24/30/48/50)Hz
2560×1600@(24/30)Hz

Do NOT support interlaced signal input.
3G-SDI IN

SMPTE ST 425-1 Level A & B, SMPTE ST 274, ST 296, ST
295 compliant

Max input resolution: 1920×1080@60Hz

Note: Do NOT support input resolution and bit depth settings.
RJ45×6 6x RJ45 Gigabit Ethernet ports

Max loading capacity per port:

Support redundancy between Ethernet ports.
2x 10G optical ports
OPT1
OPT2

The maximum loading capacity of a single optical port equals
to that of 6 Gigabit Ethernet ports.

2x OPT inputs/outputs

In sending card mode, either the 2 optical ports or the 6
Gigabit Ethernet ports can work as output ports to output the
same image.

In fiber converter mode, when the optical ports work as input
ports, the 6 Gigabit Ethernet ports work as output ports. When
the 6 Gigabit Ethernet ports work as input ports, the optical
ports work as output ports.
DVI loop through
DVI LOOP
HDMI loop through. Support HDCP 1.3 loop through encryption.
HDMI LOOP
SDI loop through
3G-SDI LOOP
ETHERNET Connect to the control computer.
MCTRL660 PRO Independent Controller User Manual
Max width: 3840 pixels (3840×600@60Hz)
Max height: 3840 pixels (800×3840@30Hz)
−
8bit: 650,000 pixels
−
10/12bit: 325,000 pixels
−
Single-mode twin-core fiber: Support LC optical
connectors; wavelength: 1310 nm; transmission distance:
10 km; OS1/OS2 recommended
−
Dual-mode twin-core fiber: Support LC optical
connectors; wavelength: 850 nm; transmission distance:
300 m; OM3/OM4 recommended
OPT1 is the main input or output port and corresponds to the
6 Gigabit Ethernet ports
OPT2 is the backup input or output port of OPT1.
3