Mapping Function - NovaStar MCTRL660 PRO User Manual

Backup and Restore
Figure 6-19 Backup and restore

Back up the system configuration to the controller.

Restore the system configuration from the controller.

Restore the receiving card configuration from the controller.

Restore the sending card configuration from the controller.
Note:
System configuration includes configuration files of the sending card (namely the controller) and receiving
cards.
Advanced Settings

6.7.1 Mapping Function

When this function is enabled, each cabinet of the screen will display the sequence number of the cabinet and
the Ethernet port that loads the cabinet.
Figure 6-20 Mapping function
Example: "P:01" stands for the Ethernet port number and "#001" stands for the cabinet number.
Note
The receiving cards used in the system must support the Mapping function.
www.novastar.tech
MCTRL660 PRO Independent Controller User Manual
19