NovaStar MCTRL660 PRO User Manual page 12

No. Description
1–2
/
7
/
Fiber Converter Mode
In the fiber converter mode, the home screen of the MCTRL660 PRO is shown below.
No. Description
1
Device name
2
Alternatively display the device IP address and sending card name.
The sending card name can be customized in NovaLCT. See
Customization.
3
OPT1 is the primary input or output optical port, corresponding to the 6 Gigabit Ethernet ports.

Always on: The optical port connection works.

Off: No optical fiber cable is connected or the connection does not work.
www.novastar.tech
Optical port connection status:

Always on: The optical port connection works and the port serves as
primary.

Off: No optical fiber cable is connected or the connection does not work.
Control port connection status: Not connected / USB connected / Ethernet
connected / GENLOCK connected
/ /
When the USB port, Ethernet port and GENLOCK connector are all
connected to the control computer, their priority in control is GENLOCK >
USB > ETHERNET.
LED screen brightness
Front panel buttons locked / unlocked
Hold down the knob and BACK button simultaneously for 3s to lock or
unlock all the front panel buttons. After the buttons are locked, all the button
operations will not take effect and
MCTRL660 PRO Independent Controller User Manual
appears on the home screen.
7.5 Sending Card Name
9