NovaStar MCTRL660 PRO User Manual page 27

Fiber Converter Mode

Only communication settings and working mode settings are available.

The temperature and voltage alarm thresholds keep the last settings.
On the OLED menu screen, set the working mode as Fiber Converter. The optical ports (for input/output) and
Gigabit Ethernet ports (for output/input) are used to realize conversion between optical and electric signals. See
Application 2: Fiber Converter
Figure 6-27 Home screen in the fiber converter mode
Language
Change the system language of the device.
www.novastar.tech
MCTRL660 PRO Independent Controller User Manual
Mode. The home screen in the fiber converter mode is shown below.
24