NovaStar MCTRL660 PRO User Manual page 7

Power
Power switch
www.novastar.tech

IN: 1x type-B USB 2.0, used as the input port to cascade
devices or connect to PC for device debug
USB IN-OUT

OUT: 1x type-A USB 2.0, used as the output port to cascade
devices. Up to 8 devices can be cascaded.
GENLOCK A pair of Genlock signal connectors. Support Bi-Level, Tri-Level
and Black burst.
IN-LOOP

IN: Accept the sync signal.

LOOP: Loop the sync signal.
100 V–240 V AC
ON/OFF
MCTRL660 PRO Independent Controller User Manual
4