Setting The Room Temperature; Setting The Room Temperature For Standard Heating Mode; For The Heating Circuit Displayed In The Header; For The Other Heating Circuits - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Central Heating
Selecting a Heating Circuit

Setting the Room Temperature

14
(continued)
Note: If you return to the standard menu with
the header will again display "HC1" (see page 8).
For changes to the heating circuit display in the
standard menu, see page 24.

Setting the room temperature for standard heating mode

Factory setting: 68° F (20° C)

For the heating circuit displayed in the header

Proceed as described on page 12.

For the other heating circuits

Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary.
4. "Set room temperature"
5. Set the required value.
Setting the room temperature for reduced heating mode
(night setback)
Factory setting: 37.5° F (3° C)
Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary.
4. "Set reduced room temperature"
5. Set the required value.
The rooms are heated to this temperature:
H Between the time phases for standard heating mode
(see page 15).
H In the holiday program (see page 18).
Vitotronic 200-H, HK1B Operating
,