Scanning Fault Messages - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Vitotronic 200-H, HK1B Operating

Scanning Fault Messages

If any faults have occurred in a boiler, the symbol
flashes on the display and "Fault" is shown.
The red fault indicator also flashes (see chapter "Starting
the heating system").
1. You can call up the cause of the fault with OK.
2. Pressing calls up information on the heating system
?
performance.
Tips on which measures you can take yourself before
notifying your heating contractor are also displayed.
3. Make a note of the cause of the fault and the fault
code next to it on the right. In this example: "Outside
temp sensor 18" and "Fault A2".
This enables the heating contractor to be better
prepared for the service call and may save additional
travelling costs.
4. If you want to acknowledge the fault message, follow
the instructions in the menu.
The fault message is transferred to the menu.
Display in the standard menu
Display in the extended menu
Note:
H If you have connected up signalling equipment
(e.g. a buzzer) for fault messages, this is deactivated
when the fault message is acknowledged.
H If the fault can only be rectified at a later date, the fault
message will be displayed again the next day and the
signalling equipment will be switched on again.
Calling up an acknowledged fault message
Extended menu
1.
2. "Fault"
Scanning

27