Stopping Central Heating; Select Comfort Function "Party Mode - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Vitotronic 200-H, HK1B Operating

Stopping Central Heating

Selecting Comfort Function "Party Mode"
Central Heating/Comfort and Energy Saving Functions
For the heating circuit displayed in the header
Standard menu
1. for the heating program "Only DHW" (summer
mode, no central heating)
or
"Standby mode" (frost protection monitoring).
2. OK to confirm.
For the other heating circuits
Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary (see page 13).
4. "Heating program"
5. "Only DHW" (summer mode, no central heating)
or
"Standby mode" (frost protection monitoring)
With this function, you can change the room temperature
for several hours, e.g. if guests unexpectedly stay longer
in the evening. You do not have to change any existing
control settings. With this function, DHW is reheated
to the selected set temperature.
Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary (see page 13).
4. "Party mode"
5. Set the room temperature required during party mode.
Display in the standard menu
Note: The display of the selected set room temperature
does not change.
H The rooms are heated to the required temperature.
H DHW is reheated to the selected set temperature.
H The DHW circulation pump is switched ON (if installed).
Ending party mode
H Automatically when the system switches to standard
heating mode in accordance with the time program.
or
H In the extended menu, set "Party mode" to "OFF".
17