Selecting The Language; Setting The Time And Date; Setting The Temperature Unit; Restoring The Factory Settings - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Vitotronic 200-H, HK1B Operating

Selecting the Language

Setting the Time and Date

Setting the Temperature Unit (°C/°F)
Restoring Factory Settings
Extended menu
1.
2. "Settings"
3. "Language"
4. Select the required language.
The time and date are factory-set. If your heating system
has been shut down for a long time, it may be necessary
to set the time and date.
Extended menu
1.
2. "Settings"
3. "Time/Date"
4. Set the time and date.
Factory setting: °C
Extended menu
1.
2. Settings"
3. "Temperature unit"
4. Select the temperature unit "°C" or "°F".
You can reset the factory settings of all modified values
for each heating circuit separately.
Extended menu
1.
2. "Settings"
3. "Standard setting"
4. "Heating circuit 1", "Heating circuit 2"* or "Heating
circuit 3"*
The following settings and values are reset:
H Set room temperature for standard heating mode
("Set room temperature").
H Set room temperature for reduced heating mode
("Set red. room temp").
H Heating program ("Heating program").
H Set DHW temperature ("Set DHW temperature").
H Time program for central heating ("Heating time program").
H Time program for DHW heating ("DHW time prog").
H Time program for DHW circulation pump
("DHW circ time prog").
H Heating curve slope ("Slope") and shift ("Level").
Party mode, economy mode and holiday program are deleted.
* Only available with the installation of an accessory
module - extension for heating circuits 2 & 3.
Further Adjustments
25