Viessmann VITOTRONIC 200-H Operating Instructions Manual page 21

Vitotronic 200-H, HK1B Operating
Setting the Time Program for DHW Heating
(continued)
Extended Menu
1.
2. "DHW"
3. "DHW time prog"
4. "Individual"
5. Select part of the week or a day.
6. Select the time phase !, ?, § or $.
7. Set the start and end points for the relevant time
phase.
8. Press to exit the menu.
Note: If you want to terminate a time phase setting
process prematurely, keep pressing
required display appears.
Example shown:
H Time program for Monday to Friday
("Mo-Fr")
H Time phase !:
From 04:30 to 06:30 h
H Time phase ?:
From 15:30 to 20:30 h
Example:
You want to set the same time program for every day
except Monday:
Select the period "Monday–Sunday" and set the time
program.
Then select "Monday" and set the time program for this.
Deleting a time phase
Set the time for the end point to the same time that was
set for the start point. The display shows the selected
time phase "- - : - -".
DHW heating once, no longer in the time program
Note: The heating program "Heating and DHW" or
"Only DHW" must be set for at least one system
heating circuit.
Extended menu
1.
2. "Heating"
3. "Party mode"
4. Disable "Party mode" again with "OFF" to prevent
unintentional central heating with standard room
temperature.
DHW Heating
until the
21