Stop Dhw Heating; Setting The Display Contrast; Setting The Display Brightness - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Vitotronic 200-H, HK1B Operating
Stopping DHW Heating

Setting the Display Contrast

Setting the Display Brightness

You do not want to have DHW or heat your rooms.
For the heating circuit displayed in the header
Standard menu
1. for the heating program "Standby mode" (frost
protection monitoring).
2. OK to confirm.
For the other heating circuits
Extended menu
1.
2. Select the heating circuit, if necessary (see page 13).
3. "Heating"
4. "Heating program"
5. "Standby mode" (frost protection monitoring)
You do not want DHW, but do want to heat the rooms.
Extended menu
1.
2. Select the heating circuit, if necessary (see page 13).
3. "Heating"
4. "Heating program"
5. "Heating and DHW"
6. until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Select 50° F (10° C).
Extended menu
1.
2. "Settings"
3. "Contrast"
4. Set the required contrast.
If you would like the texts in the menu to be more clearly
legible, change the brightness for "Control".
You can also alter the screen saver brightness.
Extended menu
1.
2. "Settings"
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
DHW Heating
23