Controls; Opening The Control Unit; Programming Unit; Help" Menu - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Vitotronic 200-H, HK1B Operating

Controls

Legend
A Cover flap
  T akes you to the previous step in the menu
or cancels a setting that has been started.
Cursor keys
To scroll through the menu or to set values.
OK Confirms your selection or saves the setting.
To call up additional information regarding
?
the selected menu option.
Calls up the extended menu.
You can change any settings on your heating system
centrally at the programming unit of the control unit.
If remote controls are installed in your rooms, you can
also adjust the settings at the remote controls.

Opening the control unit

Remote control Operating Instructions
The programming unit is located behind the flap.
Brief operating instructions can be found on the back of
the flap.
To open, pull the flap from the top edge forward.

Programming unit

"Help" Menu

You can view a short guide giving an explanation of the
controls and information about heating circuit selection
(see page 9).
Call up the short guide as follows:
H If the screen saver is active (see page 9):
Press
?
H From anywhere in the menu:
Press until the standard menu is shown (see the
following chapter).
Press
?
Operation
7