Scanning Information - Viessmann VITOTRONIC 200-H Operating Instructions Manual

Scanning

Scanning Information

26
Vitotronic 200-H, HK1B Operating
Subject to the connected components and settings
made, you can scan current temperatures and operating
conditions.
The extended menu splits the information into groups:
H "General"
H "Heating circuit 1"
H "Heating circuit 2"*
H "Heating circuit 3"*
H "DHW"
H "Solar"
H "Reset data"
Note: If heating circuits have been given names,
the name is displayed (see chapter
"Entering names for the heating circuits").
For detailed scanning options for the individual
groups, see chapter "Scanning options in the
extended menu".
* Only available with the installation of an accessory
module - extension for heating circuits 2 & 3.
Extended menu
1.
2. "Information"
3. Select the group.
4. Select the required scan.
Scanning in conjunction with solar thermal systems
Extended menu
1.
2. "Solar energy"
The solar energy yield for the past 7 days is displayed
on a graph.
The flashing line on the graph indicates that the current
day is not yet over.
Note: Further scanning options, e.g. for the solar circuit
pump hours run, can be found in the extended
menu under "Information" in the "Solar" group.
Resetting data
You can reset the following data to 0:
H In conjunction with a solar thermal system:
Solar energy yield, solar circuit pump hours run and
hours run output 22.
H All the above data simultaneously
Extended menu
1.
2. "Information"
3. "Reset data"