Loading Driver Configuration Files; Loading Device Configuration - Comtrol DeviceMaster LT User Manual

Loading Driver
Configuration Files
Loading Device
Configuration
DeviceMaster LT User Guide: 2000586 Rev. B
You must have previously saved a driver configuration file before you can load a
configuration file.
The driver configuration file uploads in portions:
• Device-level configuration parameters.
• Port configuration parameters. You must upload each port's configuration
parameters separately.
Use the following procedure to load the configuration file for device-level
information for your DeviceMaster LT.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click on the
Comtrol Drivers Management Console.
• Shortcut; located under Start> Program Files> Comtrol> DeviceMaster LT>
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.
3. In the left pane, highlight the DeviceMaster LT for which you want to load the
device-level settings from the configuration file.
4. Click Load Configuration.
5. Browse to the location of the configuration file that you want to load.

Loading Driver Configuration Files

Managing the DeviceMaster LT - 81