Using Driver Configuration Files; Saving Driver Configuration Files; Saving Device-Level Configuration - Comtrol DeviceMaster LT User Manual

Using Driver Configuration Files

Saving Driver
Configuration Files
Saving Device-Level
Configuration
DeviceMaster LT User Guide: 2000586 Rev. B
This subsection discusses how to create (save) and load driver configuration files.
You may want to create driver configuration files for these reasons:
• Save the driver configuration settings so that you can load them on similar
DeviceMaster LTs to save configuration time
• Save the driver configuration settings because you need to remove a driver
version to install a new driver version and you want to reload the driver
configuration settings into the new driver
You must save the driver configuration file in portions:
• Device-level configuration parameters.
• Port configuration parameters. You must upload each port's configuration
parameters separately.
Use the following procedure to create and save a configuration file.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click the Comtrol
Drivers Management Console.
• Shortcut; located under Start> Program Files> Comtrol> DeviceMaster LT>
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.
3. Highlight the DeviceMaster LT for which you want to save the driver
configuration.
4. Click Save Configuration.

Using Driver Configuration Files

Managing the DeviceMaster LT - 79