Accessing Socketserver Commands In Telnet/Ssh Sessions (Portvision Dx); Telnet Session - Comtrol DeviceMaster LT User Manual

Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)

Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)

Telnet Session

90 - Managing the DeviceMaster LT
You can open a Telnet or SSH session using PortVision DX. Use the appropriate
procedure for your site:
• Telnet Session (below)
• SSH Session on Page 92
Use the following procedure to access a telnet session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster LT in the
Device List pane for which you want to open a telnet session, and click Telnet/
SSH Session.
2. Leave the popup set to Telnet and Selected Port 23, and click Ok.
DeviceMaster LT User Guide: 2000586 Rev. B