Loading Wireless Configuration System Settings - Comtrol DeviceMaster AIR User Manual

Hide thumbs Also See for DeviceMaster AIR:

Table of Contents

Loading Wireless Configuration System Settings

24 - DeviceMaster AIR User Guide: 2000365 Rev. C

Use your web browser to access the Admin tab to load previously saved system

settings.

If you updated the wireless firmware and want to load the configuration settings

that you saved, make sure that the computer has an IP address within the same

range as the WLAN IP address of the DeviceMaster AIR. After updating the

wireless firmware, the DeviceMaster AIR is reset to the default IP address,

192.168.0.30.

1. Open the web browser and enter the DeviceMaster AIR IP address.

2. Select or type in user name in the User Name field.

3. Enter the password, if a password was configured during initial installation.

4. Select the Admin tab.

5. Select Browse from the System Settings group, highlight the configuration file

you want to load, and select Open.

6. Select Load from the System Settings group and Ok.

7. Select Continue.

Hardware Installation and WLAN Configuration

Table of Contents