Sending and
Receiving Data (RS-
485: 2-Wire)
DeviceMaster LT User Guide: 2000586 Rev. B
This procedure shows how to use Test Terminal (WCom2) to test two RS-485 (2-
Wire, Half-Duplex) ports.
1. In PortVision DX, click Tools >Applications >Test Terminal (WCom2) to start Test
Terminal.
2. Open two ports RS-485 ports. This example uses COM40 and COM41.
Test Terminal will open two windows, note that both ports show Receiving on
the status bar.
Sending and Receiving Data (RS-485: 2-Wire)
Troubleshooting and Technical Support - 121