Comtrol DeviceMaster LT User Manual page 78

Loading a SocketServer Configuration File
78 - Managing the DeviceMaster LT
• Click Load Settings from a File
on the Software Settings tab of
the Properties screen
2. Click Yes to the warning that it
will take 25 seconds per device
and it may also reboot the devices.
3. Browse to the location of the
configuration file, click the file
name (.dc) and then Open.
4. Click the All check box or click
only the properties that you want
to load for each property page in
the configuration file and then
click Done.
Note: If you click All, every
selected DeviceMaster LTs
will be programmed with
the same IP address.
5. Close the Load Configuration
popup message.
DeviceMaster LT User Guide: 2000586 Rev. B