Restoring Serial Port Settings; Ns-Link Com Port; Socket Port - Comtrol DeviceMaster LT User Manual

Restoring Serial Port Settings

Restoring Serial Port Settings

NS-Link COM Port

Socket Port

88 - Managing the DeviceMaster LT
5. If a higher version of SocketServer is available and you want to update the
DeviceMaster LT with the latest software:
a. Update SocketServer using
on Page 24.
b. Download the latest driver from
win7.
c. Update to the latest driver using the
Link) User Guide,
Comtrol CD shipped with the DeviceMaster LT.
Use the web page and/or the NS-Link device driver for Windows to restore the
serial port settings to their default values.
The NS-Link serial port settings are independent of the socket serial port settings
on the web page. If you are using COM ports and also have configured the port for
socket services, you must restore the default port settings in the driver and web
page.
You can use this procedure to reset NS-Link serial port settings.
1. Open the Comtrol Drivers Management Console using Start > Programs >
Comtrol > DeviceMaster LT or under Control Panel, Comtrol Drivers Management
Console.
2. Highlight the first port that you want reset to default values.
3. Click the Defaults button (and if appropriate, Clone).
4. Click Apply or Ok.
If necessary, you can reset DeviceMaster LT device properties to their defaults on
the Device General tab using the Defaults button.
Use the following procedure to reset the socket port serial settings.
1. Open the DeviceMaster LT web page
43).
2. Scroll to the bottom of the Server Status page (main) and click Reboot.
Uploading SocketServer with PortVision DX
ftp://ftp.comtrol.com/dev_mstr/LT/drivers/
DeviceMaster LT Device Driver (NS-
which can be downloaded using Page 9 or viewed on the
(Accessing Socket Configuration
DeviceMaster LT User Guide: 2000586 Rev. B
on Page